Arikah Map

Grade (slope)

Comparison of tangent and sine gradients for various angles
angletangentsine
0%0%
9%9%
10°18%17%
30°58%50%
45°100%71%
60°173%87%
90°100%

A grade (or gradient) is the pitch of a slope, and is often expressed as a percent tangent, or "rise over run". It is used to express the steepness of slope on a hill, roof, or road, where zero indicates level (with respect to gravity) and increasing numbers correlate to more vertical inclinations. There are three common numbering systems:

The difference between the latter two is small for gentle slopes (see small-angle formula). The ambiguities and the small differences that result may permit these two inconsistent approaches to coexist unrecognized, especially where grades considered are 15% or less.

Many of the mathematical principles of slope, that follow from the definition, are applicable in topographic practice. Grade is usually expressed as a percentage. Expressing it as the angle from horizontal carries the same information, but may lead to confusion for readers who are not proficient in trigonometry: they may confuse degree with percent, and/or not know how to do the conversion. In the UK, for road signs, maps and construction work, the gradient is often expressed as a ratio such as 1 in 12, or as a percentage [1].

In vehicular engineering, various land-based designs (cars, SUVs, trucks, trains, etc.) are rated for their ability to ascend terrain. (Trains typically rate much lower than cars.) The highest grade a vehicle can ascend while maintaining a particular speed is sometimes termed that vehicle's "gradeability" (or, less often, "grade ability").

Grade (slope):slope warning sign
Enlarge
slope warning sign

See also

Categories


Physical geography | Transportation engineering

Find

Find

Find